HP compaq mini cq10 Manual page 38

Chapter 3: Upgrading and routine care
b. Grasp the edge of the memory module 2, and gently pull the module out of the
memory module slot.
✎
To protect a memory module after removal, place it in an electrostatic-safe container.
7. Insert a new memory module:
CAUTION: To prevent damage to the memory module, hold the memory module
Ä
by the edges only. Do not touch the components on the memory module, and do not
bend the memory module.
a. Align the notched edge 1 of the memory module with the tab in the memory
module slot.
b. With the memory module at a 45-degree angle from the surface of the memory
module compartment, press the module 2 into the memory module slot until it is
seated.
36 Getting Started Guide