1. Save your work and shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Unplug the power cord from the AC outlet.
4. Remove the battery 1 from the computer.
5. Remove the vanity cover:
a. Slide the inner release latch 2 to loosen the vanity cover.
b. Lift the back edge 3 of the vanity cover, and then remove it from the computer 4.
6. Remove the existing memory module:
CAUTION: To prevent damage to the memory module, hold the memory module
Ä
by the edges only. Do not touch the components on the memory module.
a. Pull away the retention clips 1 on each side of the memory module.
The memory module tilts up.
Getting Started Guide
Chapter 3: Upgrading and routine care
35