Panasonic KX-HDV230NE Operating Instructions Manual page 14

Before Operating the Telephones
For details about changing the program keys, see "Changing the Function Keys (Program Keys and
DSS Keys)", Page 45.
Handset Hook
Keeps the handset stable when the unit is mounted on a wall. For details, see "Hooking the
Handset", Page 58.
Headset Jack
Optional headsets can be used with this unit. (Not all operations with the headsets can be
guaranteed.) For up-to-date information about headsets that have been tested with this unit, refer to
the following web site:
http://www.panasonic.net/pcc/support/sipphone/
/MESSAGE
Used to access your voice mailbox.
/REDIAL
Used to redial the last dialed number.
/HEADSET
Used for performing headset operations.
/MUTE/AUTO ANS
Used to receive an incoming call in hands-free mode or mute the microphone/handset during a
conversation.
/VOL
Used to adjust the ringer/receiver volume.
/HOLD
During talking, used to place a call on Hold. In standby mode, used to retrieve a call on hold if there
is one.
Microphone
Used for hands-free conversation.
/SP-PHONE
Used for performing hands-free operations.
/TRANSFER
Used to transfer a call to another party.
/CONF
Used to establish a multiple-party conversation.
Page Key
Used to switch the page of program keys displayed on the self-labeling LCD. There are two pages of
12 program keys.
Self-labeling LCD
For details about the self-labeling LCD, see "Sub Display (Self-labeling LCD)", Page 16.
DSS Keys [01–20] (Function Keys
Used to perform the assigned function. When a key is assigned as a Line key, it can be used to
confirm the status of the line. The key name that you assigned is displayed on the KX-HDV20's
self-labeling LCD. For details about changing the DSS keys, see "Changing the Function Keys
(Program Keys and DSS Keys)", Page 45.
*2
DSS Page Key
Used to switch the page of DSS keys displayed on the KX-HDV20 self-labeling LCD. There are two
pages of 20 DSS keys.
*1 In this manual, "Function key" refers to both program keys and DSS keys.
*2 These keys can be used when you connect a KX-HDV20 to the unit.
Note
R "DSS" stands for "Direct Station Selection".
14
*1 *2
)