Brother MFC-J680DW Basic User's Manual page 64

Error Code Problem and Recommended Solutions
TS-05 The security information (SSID/Network Key) is incorrect.
Confirm the SSID and Network Key. If your router uses WEP encryption, enter
the key used as the first WEP key. Your Brother machine supports the use of
the first WEP key only.
TS-06 The wireless security information (Authentication method/Encryption method/
Network Key) is incorrect.
Confirm the wireless security information (Authentication method/Encryption
method/Network Key) listed in TS-04. If your router uses WEP encryption,
enter the key used as the first WEP key. Your Brother machine supports the
use of the first WEP key only.
TS-07 The machine cannot detect a wireless access point/router that has WPS or
AOSS
If you would like to configure your wireless settings using WPS or AOSS
you must operate both your machine and the wireless access point/router.
Confirm that your wireless access point/router supports WPS or AOSS
try starting again.
If you do not know how to operate your wireless access point/router using
WPS or AOSS
point/router, ask the manufacturer of your wireless access point/router, or ask
your network administrator.
TS-08
Two or more wireless access points that have WPS or AOSS
detected.
• Confirm that only one wireless access point/router within range has the
WPS or AOSS
• Try starting again after a few minutes to avoid interference from other
access points.
™
enabled.
™
, see the documentation provided with your wireless access
™
method active and try again.
™
,
™
and
™
enabled are
52