Log" Module: Log Settings - VTech VSP725 Administrator And Provisioning Manual

"log" Module: Log Settings

The log settings control system logging activities. System logging may be required for
troubleshooting purposes. The following logging modes are supported:
 Serial/Console—system log output to an external console using a serial/RS-232
cable
 Syslog server—output to a log file on a separate server
 Volatile file
The log settings follow the format: log.[element].
All the log settings are included in the general configuration file.
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
VSP725 Administrator and Provisioning Manual
log.syslog_enable
Enables or disables log output to syslog server.
0 (disabled), 1 (enabled)
log.syslog_server_address
Sets the syslog server IP address.
Text string (IPv4)
log.syslog_server_port
Sets the syslog server port.
1–65535
log.syslog_level
Sets the log level. The higher the level, the larger the debug output.
5—all
4—debug
3—info
2—warning
1—error
0—critical
0–5
120
Default: 0
Default: Blank
Default: 514
Default: 2
Back to Contents