HP Tape Library MSL6000 Series Setting Up

HP
StorageWorks
Inspect the contents of the kit:
Documentation CD – User guide and Web links
for product registration, drivers, and technical
support.
Warranty Card – Information about accessing
product warranty details.
Safety Booklet – Important product safety
information.
SCSI Terminator(s) – Used in cabling the library.
SCSI Cable(s) – Used in cabling the library.
MSLUtil Diagnostic Software – Product
diagnostic utility.
Serial Cable – Used in conjunction with MSLUtil
diagnostic software.
Note: Accessory kit contents may vary
by product. Optional accessories include
rack mounting hardware for mounting the
library into an HP Rack 10,000 Series
enclosure and a rack system/e or
AlphaServer H9A rack enclosure.
Refer to the documentation for those kits.
MSL6000
Series
Tape Library
Setting Up
Your Library
FRONT VIEW:
1. Left magazine door
2. Left magazine
3. Mail slot
4. Viewing window
REAR VIEW:
1. Power supply
2. Power switch
3. Pass-through
mechanism interface
controller
4. Pass-through
mechanism mounting
location
5. GUI touch screen
6. Library status LED
7. Right magazine
8. Right magazine door
5. Blank cover
6. Tape drive 0
7. Accessory PCI slots (2)
8. Library controller
board