Panasonic KX-TGF380 Quick Manual page 9

TGF38x(en)_QG.fm Page 9 Thursday, November 27, 2014 2:25 PM
Using Bluetooth devices
Using a Bluetooth wireless headset (optional) for landline calls
By pairing a Bluetooth headset to the base unit, you can have a hands-free conversation wirelessly for
landline calls.
L Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the
headset and 1 cellular line).
Pairing a headset to the base unit (Handset/Base unit)
1
Your headset:
Set your headset to pairing mode.
L Refer to your headset operating instructions.
2
{MENU}(621
3
If your headset PIN is "0000", go to step 4.
If your headset PIN is other than "0000", press {CLEAR}, then enter your headset PIN.
L Typically, default PIN is "0000". Refer to the headset operating instructions.
4
Press {OK}, then wait until a long beep sounds. s {OFF}/{EXIT}
L When is displayed on the base unit, the headset is available for use.
Operating a Bluetooth wireless headset using a landline (Base unit)
Refer to your headset operating instructions for headset operations.
N Answering landline calls with your headset
To answer a landline call, press your headset's button referring to your headset operating instructions.
When you finish talking, press your headset's button referring to your headset operating instructions.
L If you cannot hang up the call using your headset, press {s} on the base unit 2 times.
N Switching between the base unit and your headset
You can switch between the base unit and your headset:
− during a landline call with the base unit.
− during an intercom call between the base unit and handset.
− while listening to messages recorded on the base unit answering system.
To switch to your headset:
Press { } on the base unit.
To switch to the base unit:
Lift the corded handset to talk with the corded handset.
or
Press {s} to talk with the speakerphone.
1
1 Pair using the handset or base unit.
2 Paring
– 9 –
2