Display Section; Jog Dial Display - Pioneer CDJ-800MK2 Operating Instructions Manual

Names and Functions of Parts

Display Section

51
51. Track number/folder number display (TRK/FLD)
When playing an audio CD, the [TRK] indicator lights, and the two-
digit track number appears (01 to 99).
When playing MP3, [TRK] lights and the track number is displayed in
three digits (01 to 999). During folder search, the [FLD] indicator lights,
and a two-digit folder number is displayed (00 to 99).
52. Auto cue indicator (A.CUE)
Lights when auto cue is ON.
53. REMAIN indicator
This indicator lights to indicate that track's remaining time is being
displayed.
54. Time (minutes) display (M)
55. Time (seconds) display (S)
56. Frame display (F)
Seventy-five frames equal one second.
57. TEMPO display
Displays change in playing speed (tempo) caused by movement of
the TEMPO adjust slider.
58. Tempo control range display (WIDE)
Lights when TEMPO ±10/WIDE button is set to [WIDE].
59. Playing address display
To provided a quick grasp of the current track's elapsed time and
remaining playing time, the entire track is shown as a bar graph scaled
over the entire width of the display.
¶ During elapsed time display, the bar graph's indicator segments
turn on from left to right.
¶ During remaining time display, the bar graph indicator segments
turn off from left to right.
¶ When a track has less than 30 seconds of remaining play time,
the graph flashes slowly; when less than 15 seconds remain, the
flashing becomes quicker.
60. Memory point display
If cue memory or loop memory has been recorded in the currently
playing track, its relative starting position is displayed here.
61. Dot matrix display (7x5 dots by 9 segments)
The dot matrix is used to display TEXT, guides and other information.
Text up to 48 characters can be displayed (text longer than 8 charac-
ters is scrolled). P. 17
62. BPM display (0 to 360 BPM)
This display shows the Beats-Per-Minute (BPM) of the currently play-
ing track (detection range 70 to 180 BPM). The automatic BPM coun-
ter may be unable to compute the correct BPM for some tracks.
63. Master tempo indicator (MT)
Lights when the master tempo function is ON.
12
52 53 54
59 60
55 56
61

Jog dial display

71. Operation display
This display shows the relative playing position, with one revolution
equivalent to 135 frames. During playback, the display rotates, and it
stops during pause mode.
72. Cue point position indicator
Indicates position of cue points.
73. Audio memory status indicator
This indicator flashes during audio memory write, and lights when
writing has been sufficiently completed. When the indicator is flash-
ing, it may not be possible to record real time cue points. The indica-
tor also flashes when memory insufficiency occurs due to scratch
operation.
74. Jog touch detection indicator
In VINYL mode, this indicator lights to indicate that the jog dial sur-
face has been touched.
75. VINYL mode indicator
Lights during VINYL mode.
57 58
62 63
71
72
73
74
75