Zte ZXR10 ZSR V2 Series Product Description page 15

calculate its own route table according to the received routes. RIP runs simply and is
applied to small networks.
ZXR10 ZSR V2 supports the following RIP functions:

Support RIPv1/v2 basic functions such as split horizon, poison reverse, interface
verification, route collection, and route protocol redistribution.

Support RIP load sharing.

Support RIP VPN access.

Support RIP MIB.
3.1.1.3 OSPF
OSPF routing protocol is used for route information exchange between routers in one
Autonomous System (AS), so it is an Interior Gateway Protocol (IGP) based on link status.
OSPF is one of the most widely used IPv4 IGP routing protocols. ZXR10 ZSR V2 supports
the following OSPF functions:

Support OSPF basic functions such as neighbor certification, Virtual Link, STUB,
NSSA, Type-3 LSA aggregation, Type-5 LSA aggregation, and redistribution of other
route protocols.

Support OSPF route load sharing.

Support VPN access and advanced functions such as sham-link.

Support OSPF BFD.

Support OSPF FRR.

Support OSPF-TE.

Support OSPF MIB.
3.1.1.4 IS-IS
IS-IS is a routing protocol drafted by ISO to support Connectionless Network Service
(CLNS). IETF extends the IS-IS to support IP route information. ISIS is also an Interior
Gateway Protocol (IGP) based on link status.
ZTE Confidential & Proprietary
ZXR10 ZSR V2 Series Router Product Description
13