Digital Communication; Keypads; Events; Programming - Bosch B5512 Reference Manual

Hide thumbs Also See for B5512:
Table of Contents

Advertisement

Control Panel
3.3.4

Digital communication

The control panel uses its built-in Ethernet connection, a B426 Conettix Ethernet
Communication Module, a Conettix Plug-in cellular module (B440/B441/B442/B443 plugged
into the control panel or plugged into a B450 Conettix Plug-in Communicator Interface), or a
B430 Plug-in Telephone Communicator to send reports to the central station receiver.
The control panel sends reports in either the Modem4 or ANSI-SIA Contact ID format.
The system can route Event Reports to four different destinations through an IP network or
the telephone network (PSTN). Program primary and backup reporting destinations for each.
A custom option allows you to specify which Event Reports the system sends.
3.3.5

Keypads

B5512/B4512 control panels support up to 8 keypads, in any combination of SDI2 keypad
models. The B3512 supports up to 4 keypads.
The control panel supervises all SDI2 keypads. Supervision for the 16 SDI keypads is
configurable.
3.3.6

Events

Event memory
The control panel retains point alarm and trouble events for each area in event memory. You
can view event memory on a keypad. Turning an area on clears the event memory for that area.
Event log
The event log stores local and reported events. The event log includes information such as
time, date, event, area, point, and user. View the event log from a keypad or use RPS to
remotely retrieve event information. When the event log reaches a programmed threshold of
stored events, it can send an optional report to a receiver.
B5512 control panels store up to 255 events. B4512 and B3512 control panels store up to
127.
3.3.7

Programming

Use RPS to program the control panels. You can connect to the control panel using a network
connection (on-board Ethernet port, cellular module, B426 Conettix Ethernet Communication
Module, or telephone module), or locally using the control panel's on-board Ethernet port or
USB port. (To program with the USB port connection, use the B99 USB 2.0 Type A Male to
Type A Male cable by Bosch.) You can also use a keypad for select programming.
Refer to RPS Help or the control panel's Program Entry Guide, and to Keypad Installer menu,
page 101 for programming options.
Notice!
After system installation and any control panel programming, perform a complete system test.
A complete system test includes testing the control panel, all devices, and communication
destinations for proper operation.
3.3.8

Firmware updates

The system can update the firmware remotely:
Bosch Security Systems, Inc.
Control panel updates. Remotely update the control panel firmware for easy feature
enhancements without replacing ROM chips.
Module update support. Remotely update the firmware on connected SDI2 modules for
easy feature enhancements without visiting each individual module.
Installation and System Reference Guide
System overview | en
21
2015.07 | 12 | F.01U.287.180

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

B3512B5512eB4512eB3512eB4512

Table of Contents