Reporting > [2] Network Menu Parameters - Bosch B5512 Reference Manual

108 en | Keypad Installer menu
6.
7.
8.
B93x/B94x keypads configuration of Phone Format
1.
2.
3.
4.
5.
6.
7.
19.1.2 [1] Reporting > [2] Network menu parameters
Enhanced communications is the ability to communicate by some means other than a standard
digital dialer. The control panel can include four separate enhanced communication
destinations to which the control panel can route events. In this menu, you can enable
enhanced communication and edit the network address, network address, poll rate, and port
number for each destination (D1, D2, D3, and D4).
D1
D2
D3
D4
Enhanced Comm
B91x/B92x keypads configuration of Enhanced Comm
1.
2.
3.
4.
5.
6.
B93x/B94x keypads configuration of Enhanced Comm
1.
2.
3.
4.
5.
6.
2015.07 | 12 | F.01U.287.180
Use [PREV] or [NEXT] to toggle between the Contact ID and Modem4 option.
Press [ENTER] while viewing the desired format to select it and save the programming.
When the keypad shows Parameter Saved, escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [1] Program > [1] Reporting > [1] Phone menu. The keypad shows the phone
number for the phone destination.
Use /[PREV] or /[NEXT] to go to the destination you want to edit.
Press [Format] to view and edit the phone format, and then press [Edit] to edit the
phone format.
Press the icon or softkey for the desired format.
Press [Save] to save the programming.
When the keypad shows Parameter Saved, escape from the menu.
Network address __________________________ Poll rate ___________
Network address __________________________ Poll rate ___________
Network address __________________________ Poll rate ___________
Network address __________________________ Poll rate ___________
Enter the installer passcode, and then open the [1] Installer menu.
Go to [1] Program > [1] Reporting > [2] Network > [1] Enhanced Comm. The keypad
shows the Enhanced Comm option as well as the current default value.
Press [ENTER] to view and change the enhanced comm options.
Use [PREV] or [NEXT] to toggle between the Yes and No options.
Press [ENTER] while viewing the desired option to save the programming.
When the keypad shows Parameter Saved, escape from the menu.
Enter the installer passcode, and then open the [1] Installer menu.
Go to [1] Program > [1] Reporting > [2] Network > [1] Enhanced Comm menu. The
keypad shows the Enhanced Comm option as well as the current default value.
Press [Enhanced Comm] to view and change the enhanced comm options, and then press
[Edit] to edit the enhanced communication option.
Press the icon or softkey for the desired option.
Press [Save] to save the programming.
When the keypad shows Parameter Saved, escape from the menu.
Installation and System Reference Guide
Control Panel
Port number _______
Port number _______
Port number _______
Port number _______
Bosch Security Systems, Inc.