Standard Product Defaults - Honeywell Voyager 1450g Series Quick Start Manual

If the bar code is highly reflective (e.g., laminated), you may need to
tilt the scanner at an angle so the bar code can be scanned.

Standard Product Defaults

The following bar code resets all standard product default settings.
Note: PDF and 2D bar codes can only be read by Voyager model
1450g2D and cannot be read by model 1450g1D.
RS485 Interface
The RS485 interface defaults to port 5B. If you have an IBM POS
terminal using port 9B, scan the appropriate code below to program
the terminal, then power cycle the cash register.
IBM Port 9B HHBCR-1
Interface
Note: For additional RS485 interface selections, see the User's
Guide for your product at our website,
www.honeywellaidc.com.
Standard Product Defaults
IBM Port 9B HHBCR-2
Interface