Advanced Settings; Displaying Advanced Settings - Epson Runsense SF-710 Ios User's Manual

Setting items
Tap
(Only for the
measurement screen)
Screen
*Indicates the default setting.
**You have to enter an altitude when setting a waypoint on your mobile device.

Advanced settings

AT Lap
Use the AT Lap function to automatically record laps
whenever a set time or distance is reached.
See "Setting the AT Lap Function" on page 22.
Target Pace
Use the Target Pace function to sound an alarm if you
fall behind your preset pace.
See "Setting the Target Pace Function" on page 25.
Waypoint
Use the Waypoint function to set target locations on
the map.
See "Setting waypoints" on page 28.
Interval
Use the Interval function to record alternating sets of
hard and light exercise.
See "Setting the Interval Function" on page 30.
Changing product settings
Value
Lap
Light
Screen Chg.
OFF*
Screen1
Screen2
Screen3
Screen4
Display Lap Screen
Explanation
You can perform one of the functions specified in this item by
tapping the screen while measuring.
When Bike is selected as the Activity Type, the tap function may
operate automatically depending on the condition of the road
surface. If this occurs, we recommend to change the setting to
OFF.
You can display up to four measurement screens. You can
change the screen pattern and the measurement items displayed
for each screen.
You can also change the Display Lap Screen, but this is not
displayed for the interval function.

Displaying advanced settings

1
Tap the Run Connect icon on your mobile
device.
21