Installing The Dicing Disc And Blade - KitchenAid KSM2FPA Instructions Manual

INSTALLING THE DISCS

Installing the dicing disc and blade

Insert the liner into the attachment
1
assembly so that the feed tubes line
up and the liner lies flat.
Dr_ive pin
Install the blade on top of the dicing disc
3
by sliding it onto the drive pin.
10
Hold the dicing disc by the middle hole
2
and disc edge, chute lip-side facing
DOWN. Place the disc on top of the
liner so that the dicing grate aligns with
the liner's feed tube.
Install the lid by turning counter
4
clockwise, being sure it locks into place.