Removal And Replacement Procedures - HP Compaq TC1100 Maintenance And Service Manual

Removal and Replacement
This chapter provides removal and replacement procedures.
Torx T8 and Phillips P0 screws are removed during the
disassembly of the tablet PC and the Docking Station. There are
38 screws, in 4 different sizes, that must be removed, replaced,
and loosened when servicing the tablet PC. There are 20 screws,
in 4 different sizes, that must be removed and replaced when
servicing the Docking Station. Make special note of each screw
size and location during removal and replacement.
Refer to
on screw sizes, locations, and usage.
Maintenance and Service Guide
Appendix C, "Screw Listing,"
Procedures
for detailed information
5
5–1