Memory Seat; To Set A Memory Position; To Program A Key Fob To The Memory Position; Easy Entry/Exit Feature - Jeep 2016 CHEROKEE User Manual

Memory Seat

The memory seat feature allows you to save two different driver seating positions,
driver's outside mirror, and radio station preset settings. The memory seat buttons are
located on the driver's door panel.

To set a memory position:

1. Cycle the vehicles ignition to the ON
position.
2. Adjust all memory profile settings.
3. Push and release the S (SET) button.
4. Push and release the 1 or 2 button
within five seconds.
NOTE:
Before programming your RKE transmit-
ters you must select the "Memory Linked
To Fob" feature through the Uconnect system. Refer to "Uconnect Settings" in
"Understanding Your Instrument Panel" in the Owner's Manual on the DVD for
further details.

To program a Key Fob to the memory position:

1. Cycle the vehicles ignition to the OFF position.
2. Select the desired memory profile 1 or 2.
3. Push and release the S (SET) button on the memory switch, then within five
seconds push and release the 1 or 2 button accordingly.
4. Push and release the LOCK button on the RKE transmitter within 10 seconds.
• To recall the saved positions, push 1 or 2 on the memory switch or push UNLOCK
on the programmed RKE transmitter.

Easy Entry/Exit Feature

The memory seat has an Easy Entry/Exit feature. This feature provides automatic driver
seat positioning to enhance driver mobility when entering and exiting the vehicle.
NOTE:
The Easy Entry/Exit feature is not enabled when the vehicle is delivered from the
factory. To enable (or later disable) this feature you must select "Easy Exit Seats" in
"Engine Off Options" through the programmable features in the Uconnect system.
• Refer to "Uconnect Customer Programmable Features" in "Electronics" of this
User Guide.
• For further details refer to "Uconnect Settings" in "Understanding Your Instru-
ment Panel" in the Owner's Manual on the DVD.
GETTING STARTED
Memory Seat Buttons
33