Add Code Id Prefix To All Symbologies; Function Code Transmit - Honeywell 1400gPDF Quick Start Manual

Add Code ID Prefix to all Symbologies

Scan the following bar code if you wish to add a Code ID prefix to all
symbologies at once.
Add Code ID Prefix To All Symbologies
(Temporary)
Note: For a complete list of Code IDs, see the User's Guide for your
product at our website, www.honeywellaidc.com.

Function Code Transmit

When this selection is enabled and function codes are contained
within the scanned data, the scanner transmits the function code to
the terminal. Charts of these function codes are provided in your
User's Guide. When the scanner is in keyboard wedge mode, the
scan code is converted to a key code before it is transmitted.
Enable
(Default)
Disable