Connecting/Dubbing with other devices (Recorder, PC, Printer, etc)
Symptom
You cannot dub correctly using the HDMI
cable.
You cannot dub correctly using the
Component/AV (Video, Audio L/R) cable.
Printouts cannot be made using a
PictBridge printer.
Connecting to a computer
Symptom
The computer does not recognize your
HD camcorder.
Cannot play a movie file properly on a
Windows computer.
Intelli-studio does not function properly.
128_ English
Explanation/Solution
•
You cannot dub images using the HDMI cable.
•
The Component/AV (Video, Audio L/R) cable is not connected properly.
Make sure that the Component/AV (Video, Audio L/R) cable is connected to the
proper jack, i.e. to the input jack of the device used for dubbing images from your
camcorder. ¬page 52
•
This HD camcorder provides the two-in-one component/AV cable that fits
the purpose of the component and the AV cable. Therefore, when using the
component/AV cable, you must check the right method for the TV output by
setting the "Analog TV Out" menu. ¬ page 89
•
Your printer may not print images edited on a computer or recorded using other
device. This is not an error.
Explanation/Solution
•
Disconnect the USB cable from the computer and camcorder, restart the computer,
then connect it again correctly.
•
A video codec is needed to play the file recorded on your HD camcorder.
Install or run the built-in edit software (Intelli-studio). ¬pages 109-111
•
Make sure you insert the connector in the correct direction, and connect the USB
cable to the USB jack on your camcorder firmly.
•
Disconnect the cable from the computer and camcorder, restart the computer.
Connect it again properly.
•
To play back an HD video file, a computer with better specification is required.
Check a computer with recommended specification. ¬page 106
•
Exit the Intelli-studio application, and restart the Windows computer.
•
The built-in software on your camcorder, Intelli-studio is not Macintosh compliant.
Set "PC Software" to "On" in the Settings menu. ¬page 88
•
•
According to your computer type, the Intelli-studio program may not automatically
run. In this case, open the desired CD-ROM drive that has the Intelli-studio program
in My Computer and run iStudio.exe.