Attaching The Paper Basket - Epson STYLUS PRO 7450 Unpacking & Setup Instructions

c
Caution:
❏ Watch your fingers when opening and
closing the front cover.
L
M
N
L: Protective screw
M: Protective metal plate
N: Red wire
❏ Be careful not to touch the parts
highlighted below; otherwise, the
printer may be damaged.
Note:
Do not re-install the screw and the metal plate.
Store them separately to avoid losing them.
8. Close the front cover.
8

Attaching the Paper Basket

1. Fully insert and attach the upper basket hooks
(D) to the upper guides of the base upright left
and right.
D
2. Turning the stitch side downward, spread the
paper basket on the floor.
3. Holding the rear shaft, pass it under the
horizontal struts.