Download Print this page

Lenovo S3200 Setup Manual: Enclosure Bezel Removal

Hide thumbs

Advertisement

Enclosure bezel removal

While facing the front of the enclosure, insert the index finger of each hand into the top of the respective
(left or right) pocket opening, and insert the middle finger of each hand into the bottom of the respective
opening, with thumbs on the bottom of the bezel face. Gently pull the top of the bezel while applying slight
inward pressure below, to release the bezel from the ball studs.
Ball stud on chassis ear
(typical 4 places)
Enclosure bezel sub-assembly
(EMI shield and removable air filter)
NOTE: The dual-purpose 2U24 and 2U12 enclosure front panel illustrations that follow assume that you
have removed the enclosure bezel to reveal underlying components.
Figure 33 Partial assembly showing bezel alignment with 2U24 chassis
Figure 34 Partial assembly showing bezel alignment with 2U12 chassis
Enclosure bezel
Pocket opening (typical 2 places)
Ball stud on chassis ear
(typical 4 places)
Pocket opening (typical 2 places)
Lenovo Storage S3200/S2200 Setup Guide
57

Advertisement

   Also See for Lenovo S3200

This manual also for:

S2200

Comments to this Manuals

Symbols: 0
Latest comments: