Download Print this page

Lenovo S3200 Setup Manual: Aled Descriptions; Front Panel Leds; Enclosure Bezels; Enclosure Bezel Attachment And Removal

Hide thumbs

Advertisement

A
LED descriptions

Front panel LEDs

The S3200/S2200 enclosures support 2U24 and 2U12 enclosures in dual-purpose fashion. The 2U24
chassis—configured with 24 2.5" small form factor (SFF) disks—is used as either a controller enclosure or
expansion enclosure. The 2U12 chassis—configured with 12 3.5" large form factor (LFF) disks—is also
used as either a controller enclosure or expansion enclosure.
Supported expansion enclosures are used for adding storage. The E1012 12-drive enclosure is the LFF drive
enclosure used for storage expansion. The E1024 24-drive enclosure is the SFF drive enclosure used for
storage expansion.

Enclosure bezels

Each S3200/S2200 enclosure is equipped with a removable bezel designed to cover the front panel
during enclosure operation. The bezels look very similar, but there are differences between the two models.
The bezel fitting the 2U24 chassis provides two embossed pockets used during bezel removal
whereas the bezel fitting the 2U12 chassis provides two debossed pockets, is equipped with an EMI
(Electromagnetic Interference shield), and may or may not be equipped with the serviceable dust filtration
air filter option

Enclosure bezel attachment and removal

When you initially attach or remove the front panel enclosure bezel for the first time, refer to the
appropriate pictorials for your enclosure(s) from the list below, and follow the instructions provided.
• Front view of 24-drive enclosure (2U24):
• Front view of 12-drive enclosure (2U12):
• Bezel alignment for 24-drive enclosure (2U24):
• Bezel alignment for 12-drive enclosure (2U12):

Enclosure bezel attachment

Orient the enclosure bezel to align its back side with the front face of the enclosure as shown in
on page 57 and
the bezel, position it such that the mounting sleeves within the integrated ear caps align with the ball studs,
and then gently push-fit the bezel onto the ball studs to securely attach the bezel to the front of the
enclosure.
56
LED descriptions
(Figure
32).
Figure 31 Front panel enclosure bezel: 24-drive enclosure (2U24)
Figure 32 Front panel enclosure bezel: 12-drive enclosure (2U12)
Figure 34
on page 57. Face the front of the enclosure, and while supporting the base of
Figure 31
Figure 32
Figure 33
on page 57
Figure 34
on page 57
(Figure
31);
Figure 33

Advertisement

Troubleshooting

   Also See for Lenovo S3200

   Related Manuals for Lenovo S3200

This manual also for:

S2200

Comments to this Manuals

Symbols: 0
Latest comments: