Download Table of Contents Print this page

Charger Cleaning, Storage And Service; Cleaning; Storage; Service - Honeywell MX9 User Manual

Hide thumbs Also See for MX9:


Table of Contents

Charger Cleaning, Storage and Service


Unplug the charger from the power source before cleaning or removing debris from charging pockets.
Use only mild detergent with a slightly damp cloth to clean the outside of the charger. Do not use solvents or flammable
cleaners. Allow the case to dry fully before using again.
Do not allow cleaning agents of any kind to contact the charging contacts; they may be damaged. If necessary, clean them
with a soft-bristle, dry brush or compressed air.


Remove all batteries from the charging bays and disconnect AC power before placing the charger in storage. It should be
stored in a cool, dry place, protected from weather and airborne debris.
Battery packs should be kept in a cool, dry place whenever possible. Do not store battery packs in direct sunlight, on a metal
surface, or anywhere the battery pack cannot cool down. Do not leave the battery pack in a non-operating charger. The battery
pack may discharge through the charger rather than hold its charge.


There are no user serviceable parts in the Rechargeable Lithium Ion Battery or the Charger. Contact
Technical Assistance
should your charger require service.


Table of Contents

Table of Contents