Download Table of Contents Print this page

Honeywell MX9 User Manual page 14

Hide thumbs Also See for MX9:

Advertisement

Table of Contents
Problem
LED is flashing RED at
any pocket.
Solid YELLOW /
AMBER LED when
battery pack is inserted
in the charging pocket.
1-10
Cause
The battery pack voltage has not
reached 6.0V within 30 minutes and
the charger has timed out.The battery
pack voltage has not reached 2.5V
within 60 minutes and the charger has
timed out.
The battery pack is too hot or too cold
to charge.
Contact
Technical Assistance
options.
Remove battery pack from the charging pocket and allow it
to adjust to room temperature.
Note:
If the battery pack is left in the charging pocket, it will cool
down or warm to a temperature upon which the charger will
begin the charge cycle. However, depending on the
temperature of the battery, it may take 2-3 hours to adjust.
The cool-down / warm-up of a battery pack is much quicker
if the battery is not in the charging pocket.
Solution
for battery pack replacement

Advertisement

Table of Contents
loading

Table of Contents