Switching On And Off - Miele KFN12823SD Operating And Installation Instructions

Switching on and off

Before using for the first time
Packing material
^ Remove all the packing material from
the interior of the appliance.
Protective foil
The stainless steel trim to the interior
shelves has a layer of protective foil to
prevent damage during transporation.
On stainless steel appliances, the
stainless steel door (and sides,
depending on model) will also have a
layer of protective foil.
^ Do not remove this foil until the
appliance has been positioned in its
final location.
Cleaning
Please observe the relevant
instructions in "Cleaning and care".
^ Clean the inside of the appliance and
the accessories with lukewarm water
and then dry with a soft cloth.
18
Switching on
The refrigerator and freezer sections are
switched on together by pressing the
master switch on the right hand side of
the control panel, or by pressing the On
button on the left hand side of the
control panel.
^ Press the master switch on the right
hand side of the control panel.
The temperature display for the
refrigerator section will show the
selected temperature setting. The
temperature display for the freezer
section and the alarm indicator light will
flash until the freezer section has
cooled down to the correct temperature
for freezing.
The appliance will start cooling down
and the interior light in the refrigerator
section will come on if you open the
door.
To enable the temperature to get
sufficiently cold inside the
appliance, allow the appliance to
run for a few hours before placing
food in it.
Do not place food in the freezer
section until the temperature is at
least -18 °C.