19.Disconnect the connector CN-G from the switch unit.
20.Remove the six (6) screws holding the display unit to the key fixing
frame.
[22] COOK TOP LAMP SOCKET REMOVAL
1. Disconnect the power supply cord.
2. Remove the three (3) screws holding the deflector to the base
cover.
3. Remove the four (4) screws holding the base cover to the oven
cavity.
21.Now the display unit is free.
4. Pull down and slide to left the base cover. And remove the base
cover from the cavity back plate.
5. Disconnect the wire leads from the lamp socket.
6. Screw the oven lamp off the lamp socket.
7. Screws the lamp socket off the lamp mounting angle.
8. Now, the lamp socket is free.
Page 36
11 – 8
GLBM188HB