Position Of Loopers Threads Take Up Lever - ELNA 745 Service Manual

POSITION OF LOOPERS THREADS TAKE UP LEVER

1. Remove: Mains lead and Inside cover unit ("7" in page 2a).
2. Turn the handwheel towards you and bring upper looper thread take up lever "a" in its
highest position.
3. Check and make sure that the distance between thread take up lever guide and inside of the
machine base is at
4. If not, loosen allen screw "b" and adjust position.
5. Tighten screw "b".
46.0 to 47.3 mm.
a
b
18