Sharp PG-M15X Service Manual page 19

3. Disassemble Ballast PWB unit
3-1. Remove two screws and detach Terminal Sheet Holder.
3-2. Remove two screws and detach Grounding Sheet.
3-3. Remove two screws and detach AC Code Fix.
3-4. Remove two screws and detach ignitor cable from Lamp Housing.
3-5. Remove two screws and detach Ballast PWB unit.
3-2
Grounding Sheet
3-3
AC Code Fix
Terminal Sheet Holder
3-4
Ballast PWB unit
3-1
19
PG-M15X
PG-M15S
AN-M15T
3-5