Marantz SR7300 User Manual page 51

GENERAL MALFUNCTION
If the equipment malfunctions, this may be because an electrostatic
discharge or AC line interference has corrupted the information in the
equipment memory circuits. Therefore:
- disconnect the plug from the AC line supply
- after waiting at least three minutes, reconnect the plug to the AC
line supply
- re-attempt to operate the equipment
Memory backup
• In case a power outage occurs or the power cord is accidentally
unplugged, the SR7300 is equipped with a backup function to
prevent memory data such as the preset memory from being
erased.
HOW TO RESET THE UNIT
AV SURROUND RECEIVER SR7300
SURROUND
CLEAR MEMORY
SPEAKRS A/B 7.1CH INPUT
SELECT SELECT SELECT ENTER
TV DVD VCR1 DSS/VCR2
STANDBY
POWER ON/STANDBY PHONES
Should the operation or display seem to be abnormal, reset the unit
with the following procedure.
The SR7300 is turned on, press and hold the SELECT and ATT
buttons simultaneously for 3 seconds or more.
Remember that the procedure will reset the settings of the function
selector, Surround mode, delay time, TUNER PRESET etc., to their
initial settings.
VOLUME
DOWN UP
TUNING F/P MODE
A/D S-DIRECT MULTIROOM
MUTE ATT
AUX1 AUX2 CD-R TAPE CD TUNER
AUX1 INPUT
DIGITAL S-VIDEO VIDEO L AUDIO R
47