Periodic Maintenance Procedures
Remove the oil filler plug [A].
Pour in the specified type and amount of oil.
Recommended Engine Oil
API SG, SH, SJ, SL or SM with JASO MA,
MA1 or MA2
Viscosity: SAE 10W-40
3.9 L (4.1 US qt) (When filter is not removed)
4.4 L (4.7 US qt) (When filter is removed)
5.0 L (5.3 US qt) (When engine is completely
Do not add any chemical additive to the oil.Oils fulfilling
the above requirements are fully formulated and provide
adequate lubrication for both the engine and the clutch.
Although 10W-40 engine oil is the recommended oil
for most conditions, the oil viscosity may need to be
changed to accommodate atmospheric conditions in
your riding area.
Replace the O-ring of the oil filler plug with a new one.
Apply grease to the new O-ring.
Install the oil filler plug.
Torque - Oil Filler Plug: 10 N·m (1.0 kgf·m, 89 in·lb)
Check the oil level (see Oil Level Inspection in the Engine
Lubrication System chapter).
Oil Filter Replacement
Drain the engine oil (see Engine Oil Change).
Remove the oil filter with the oil filter wrench [A].
Special Tool - Oil Filter Wrench: 57001-1212
PERIODIC MAINTENANCE 2-39