ABS and KIBS Indicator Lights (LED) Inspection
In this model, the yellow ABS indicator light (LED) [A],
yellow warning indicator light (LED) [B] and white KIBS
indicator light (LED) [C] go on or blink by the data sent
from the KIBS hydraulic unit.
Refer to the Meter Unit Inspection in the Electrical System
Yellow ABS Indicator Light (LED), Yellow Warning Indicator
Light (LED) and White KIBS Indicator Light (LED) Function
*: The mode of "Low voltage ABS" controls ABS while
reducing the load to the battery.
When the yellow ABS indicator light (LED) is blinking,
the ABS has been in the low voltage mode (insufficient
battery voltage). When it is in the low voltage mode, the
KIBS system does not function, but the ABS functions.
To recover the KIBS system, charge the battery. (see
Refreshing Charge in the Electrical System chapter).
KIBS Hydraulic Unit Removal
The KIBS hydraulic unit [A] has been adjusted
and set with precision at the factory. Therefore, it
should be handled carefully, never struck sharply,
as with a hammer, or allowed to fall on a hard
Be careful not to get water or mud on the KIBS hy-
Drain the brake fluid from the front and rear brake lines.
Drain the brake fluid through the bleed valve by pumping
the brake lever and pedal.
Right Inner Cover (see Inner Cover Removal in the
Right Tank Cover (see Tank Cover Removal in the
Right Middle Fairing (see Middle Fairing Removal in the