Install a new valve [A] in the rim.
Apply a non-permanent locking agent to the threads of air
Tighten the valve nut.
Torque - Air Valve Nuts: 4.5 N·m (0.46 kgf·m, 40 in·lb)
The air valve is as shown.
Valve Cap [A]
Valve Core [B]
Valve Stem [C]
Valve Nut [D]
Check the tire rotation mark on the front and rear tires and
install them on the rim accordingly.
Tire Rotation Mark [A]
Rotating Direction [B]
Position the tire on the rim so that the valve [A] align with
the tire balance mark [B] (the chalk mark made during
removal, or the yellow paint mark on a new tire).
Install the tire bead over the rim flange using a suitable
commercially available tire changer.
Lubricate the tire beads and rim flanges with a soap and
water solution or rubber lubricant to help seat the tire
beads in the sealing surfaces of the rim while inflating the
Center the rim in the tire beads, and inflate the tire with
compressed air until the tire beads seat in the sealing
Overinflating a tire can cause it to explode, causing
serious injury or death. Be sure to install the valve
core whenever inflating the tire, and do not inflate
the tire to more than 400 kPa (4.0 kgf/cm², 57 psi).