Remove the vinyl bag on the pipe and fuel hose joint.
Check the joint lock for deformation and wear.
If the joint lock is deformed, replace the fuel hose with a
Check that there are no flaws, burrs, and adhesion of
foreign materials on the pipe [A].
Apply engine oil to the pipe.
Insert the fuel hose joint [A] straight onto the fuel outlet
pipe until the hose joint clicks.
Push [B] the joint lock [C] until the hose joint clicks.
Push and pull [A] the hose joint [B] back and forth more
than two times, and make sure it is locked and does not
Leaking fuel can cause a fire or explosion resulting
in serious burns. Make sure the hose joint is in-
stalled correctly on the delivery pipe.
If it comes off, reinstall the hose joint.
Connect the breather hose [A] and the drain hose [B] so
that the clamps [C] face rearward.
Connect the fuel pump lead connector and the battery (–)
terminal (see Battery Installation in the Electrical System
Install the removed parts (see appropriate chapters).
FUEL SYSTEM (DFI) 3-79