3-66 FUEL SYSTEM (DFI)
Air Cleaner Element Removal/Installation
Refer to the Air Cleaner Element Replacement in the Pe-
riodic Maintenance chapter.
Air Cleaner Element Inspection
Remove the air cleaner element (see Air Cleaner Element
Replacement in the Periodic Maintenance chapter).
Visually check the element [A] for tears or breaks.
If the element has any tears or breaks, replace the ele-
Air Cleaner Oil Draining
A drain hose is connected to the bottom of the air cleaner
housing to drain water or oil accumulated in the cleaner part.
Visually check the plug [A] of the drain hose, if the water
or oil accumulates in the plug.
If any water or oil accumulates in the plug, remove the
plug from the drain hose and drain it.
Oil on tires will make them slippery and can cause
an accident and injury. Be sure to reinstall the plug
in the drain hose after draining.
Air Cleaner Housing Removal
Air Cleaner Element (see Air Cleaner Element Replace-
ment in the Periodic Maintenance chapter)
Throttle Body Assy (see Throttle Body Assy Removal)
Remove the air cleaner housing mounting bolts [A].
Slide the clamp [B], and disconnect the breather hose [C].
Remove the air cleaner housing [D] together with the blow
-off valve hose.
Loosen the blow-off valve hose clamp screw [A].
Disconnect the blow-off valve hose [B].