ASSEMBLING AND PREPARING
The height can be adjusted up to 120 mm.
Once the pin is removed, it is not necessary
to re-insert it to adjust the height.
Do not put your finger be-
tween the screen and the
base (chassis) when adjust-
ing the screen's height.
Using the Kensington locking
The connector for the Kensington lock is located
on the rear of the monitor.
For more information on installation and usage,
refer to the Kensington lock user manual or visit
the website at http://www.kensington.com.
Connect the monitor to the table with the Kensing-
ton lock cable.
Using the Kensington lock is optional. The
accessories can be purchased at your local