Configuring the Camera
The camera is configured using the on-screen display (OSD) menus. You can connect a
portable monitor during installation using the supplied adapter cable.
To display the OSD main menu, press the
OSD controller joystick located on the
UP
camera control board.
Move the joystick up or down to navigate
LEFT
RIGHT
through the menu options. Move the joystick
right to change a menu setting.
When a menu option or setting is followed by
DOWN
, press the joystick to access the next
screen. To go back to the main menu, select
RETURNor EXIT JUMP and then press the
joystick.
5