Mounting On A Table - LG 55LF630V Series Owner's Manual

You can simply operate the TV functions, pressing or moving the joystick
button up, down, left or right.
Joystick Button
When the TV is turned o , place your
nger on the joystick button and
press it once and release it.
When the TV is turned on, place
your nger on the joystick button
and press it once for a few seconds
and release it. All running apps will
close, and any recording in progress
will stop.
If you place your nger over the
joystick button and move it left or
Control right, you can adjust the volume level
you want.
If you place your nger over the
joystick button and move it up or
Control down, you can scrolls through the
saved programmes you want.
Adjusting the menu
When the TV is turned on, press the joystick button one time. You can
adjust the Menu items moving the joystick button up, down, left or
right.
Turns the power o .
Clears on-screen displays and returns to TV viewing.
TE
When your nger over the joystick button and push it to the up,
down, left or right, be careful not to press the joystick button. If you
press the joystick button rst, you may not be able to adjust the
volume level and saved programmes.

Mounting on a table

(Depending on model)
1 Lift and tilt the TV into its upright position on a table.
Leave a 10 cm (minimum) space from the wall for proper
ventilation.
10 cm
2 Connect the power cord to a wall outlet.
Do not place the TV near or on sources of heat, as this may result in
re or other damage.
Using the kensington security
system
(This is not available for all models.)
Image shown may di er from your TV.
The Kensington security system connector is located at the rear of the
TV. For more information of installation and using, refer to the manual
provided with the Kensington security system or visit http://www.
kensington.com. Connect the Kensington security system cable between
the TV and a table.
(This feature is not available for all models.)