Remotevision Module Installation - Miele F 1471 Vi Operating And Installation Instructions

Installing the appliance
^ Loosen the bracket that holds the
appliance to the pallet.
,
Caution! The appliance is no
longer secured and may be
unstable.
^ From the rear of the appliance
carefully lift it from the pallet.
Once the appliance is on the ground it
can be wheeled around.
RemoteVision module
installation
Always disconnect the appliance
from the power supply when
performing installation, maintenance
or service work.
Install the RemoteVision module
before placing the appliance in its
installation niche.
Once connected the RemoteVision
modeul will increase the energy
consumption of the appliance.
The slot for the RemoteVision module is
located in the lower area of the back of
your appliance.
60
^ Unscrew the screws a on the cover
b and pull off the sticker c.
^ Remove the cover b.
^ Push the module into the slot until it
locks into place.