Technical Specifications - K-array Kayman KY102 User Manual

KY102

10. TEChNICAL SPECIfICATIoNS

Power handling
Max power
Frequency range
Impedance
SPL 1W/1mt
Maximum SPL
Horizontal
Vertical
Type
Frequency
Full range
Impedance
Coverage
Connector
Wiring
Type
Dimensions
Weight
Notes for data
1. With dedicated preset;
2. Measured @4 mt then scaled @1 mt;
3. Measured with musical signal
New materials and design are introduced into existing products without previous notice.
Present systems may differ in some respects from those presented in this catalogue.
The contents of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may
appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.
ACOUSTICS
1200 W
1800 W
90 Hz – 20 kHz (- 3dB)
8 Ω / 32 Ω (selectable)
102 dB
(2)
132 dB (cont.) – 138 dB (peak)
COVERAGE
90°
7° / 30° (selectable)
CROSSOVER
External crossover required
High pass @ 90 Hz, 24 dB/oct suggested
minimum
TRANSDUCERS
8 x 4" Neodymium magnet cone drivers
SELECTION SWITCHES
8 Ω / 32 Ω
Spot / Flood
POWER AUDIO INPUT/OUTPUT
2 x 4-pin Speakon
1+ 1- (signal IN & LINK); 2+ 2- (through)
RECOMMENDED AMPLIFIERS
KA84, KMT
CERTIFICATION
IP 54
PHYSICAL
11.3 x 100 x 13.2 cm
(4.45" x 39.4" x 5.2")
14.9 kg (32.8 lbs)
(1)
(3)
Ver. 1.2
14