Reset Button (located at the bottom
part of the Kenmore Smart Thermostat)
Menu / Select Key
Increase set temperature
for TEMP HOLD or PERM HOLD. Also used with DownNkey to
activate "Key Lock"
Decrease set temperature
for TEMP HOLD or PERM HOLD. Also used with Up key to activate
mode: AUTO, HEAT,COOL, OFF, & EMERGENCYHEAT
Switching fan mode: ON or AUTO
Press Menu / Select once and use Up/Down
Key to navigate the following
• When the thermostat shows the function you want to set up, press Menu/Select
to enter that function.
• For modifying parameters, use Up/Down to change and Menu/Select to confirm the setup value.
• At any time during Setup, pressing Back once will navigate backward
one level and cancel
any setting change you have made.
• Pressing and holding Back for 2 seconds while in a Menu screen will return the unit to the
Pressing and holding Back for 2 seconds while on the Home Screen will cancel Temp Hold,
Perm Hold, Vacation
mode, and Away mode. (Away mode is only available
Assurelink remote APP.)
Reset the thermostat. Can also used for installation setup and to remove the
thermostat from customer's Assurelink account. See Assurelink APP for details.