Download  Print this page

Fluid Seal Damage Inspection; Dust Seal Damage Inspection; Caliper Dust Boot And Friction Boot Damage - Kawasaki KX250F Service Manual

Hide thumbs

Advertisement

Table of Contents
Caliper

Fluid Seal Damage Inspection

The fluid seals [A] around the piston maintains the proper
pad/disc clearance. If this seal is not in good condition, pad
wear will increase, and constant pad drag on the disc will
raise brake and brake fluid temperature.
Replace the fluid seals under any of the following condi-
tions.
Fluid leakage around the pad
Brakes overheat
There is a large difference in left and right pad wear.
The seal is stuck to the piston.
If the fluid seal is replaced, replace the dust seals [B] as
well. Also, replace all seals every other time the pads are
changed.
[C] Front Caliper
[D] Rear Caliper

Dust Seal Damage Inspection

Check that the dust seals are not cracked, worn, swollen,
or otherwise damaged.
If they show any damage, replace them.

Caliper Dust Boot and Friction Boot Damage

Check that the dust boot [A] and friction boot [B] are not
cracked, worn, swollen, or other wise damaged.
If they show any damage, replace it.
[C] Front Caliper
[D] Rear Caliper
BRAKES 12-15

Advertisement

Table of Contents

   Also See for Kawasaki KX250F

Comments to this Manuals

Symbols: 0
Latest comments: