Download  Print this page

Advertisement

Table of Contents
Camshafts
1st Pin [A]
2nd Pin [B]
28th Pin [C]
Install the dowel pins [A] and positioning rings [B].
Apply molybdenum disulfide oil to the threads and seating
surface of the camshaft cap bolts.
Tighten all camshaft cap bolts evenly and lightly, and then
tighten them with specified torque.
Follow the numbers of tightening sequence on the
camshaft cap.
Bolt [5] is long.
Torque - Camshaft Cap Bolts: 9.8 N·m (1.0 kgf·m, 87 in·lb)
Replace the O-ring [A] with a new one, and apply grease
it.
ENGINE TOP END 5-17
Punch Marks (exhaust) [D]
Punch Marks (inlet) [E]
Cylinder Head Upper Surface [F]

Advertisement

Table of Contents

   Also See for Kawasaki KX250F

Comments to this Manuals

Symbols: 0
Latest comments: