Battery Strength Indicator - RCA BR250 Instruction Manual

22
Battery Save feature is automatically activated
when no activities or operations have been
performed (no key press and no knob selection)
for an extended period of time.
Pressing any key or receiving a signal will end
the Battery Save mode and restore the radio
to normal operation. See Glossary for the
definition of Battery Save Mode.
Battery Strength LED Indication
70% - 100%
50% - 70%
30% - 50%
10% - 30%
Less than 10%
BR250 Professional Two-Way Radio Instruction Manual
TM
Green
Orange
Red
LED is unlit when the programmed key is pressed and flashes red while
the radio is operating.
LED is unlit when the programmed key is pressed. While the radio is on
standby, LED flashes red and a low-pitched tone sounds at ten second
intervals. Pressing the PTT then activates the talk prohibit tone.
Copyright © 2015 RCA Communications Systems

Battery Strength Indicator

The LED light on top of the radio allows you
to check the battery status by illuminating
lights with different colors. This feature is
programmed by your RCA Communications
Systems dealer upon request. Please refer to
the table below: