Product Features; Hp Z27X Monitor - HP DreamColor Z27x User Manual

1

Product Features

HP Z27x Monitor

The LCD (liquid crystal display) monitor has an active matrix, thin-film transistor (TFT) panel. The
monitor features include:
68.58 cm (27-inch) diagonal viewable area display with 2560 x 1440 resolution, plus full-screen
●
support for lower resolutions; includes custom scaling to support 4096×2160 or 3840×2160
resolutions using a variety of presentation methods
Wide color gamut to provide 100% coverage of both AdobeRGB and sRGB color spaces and
●
98% of DCI-P3
Ability to accurately remap the color gamut of the monitor (within the supported color gamut of
●
the panel) to enable the selection of the color space and very accurately set the RGB primaries
for consistent and repeatable colors
Very high color and luminance stability (with typical use)
●
Calibrated color space factory presets for sRGB, AdobeRGB, DCI-P3, BT.709, BT.601, and
●
BT-2020 so the monitor is ready to use for color critical applications with minimal setup
Re-calibrateable color presets that allow you to re-calibrate to a standard or custom color space
●
by specifying the color primaries, white point, gamma, and luminance (requires the separately
purchased HP DreamColor Calibration Solution kit)
Option to return to Factory Calibration settings or User Calibration settings to easily restore the
●
monitor to the factory or user settings
User calibration that requires the DreamColor calibration solution kit (sold separately) or a third-
●
party measurement device
Built-in support for the Klein K10-A Photo Research PR-6xx, 7xx series, and Konica Minolta
●
CA-310 measurement devices
Updatable monitor firmware to enable HP to quickly and easily provide solutions to identified
●
problems and provide custom solutions
Four reconfigurable front bezel Function buttons to quickly select the most commonly used
●
operations
Wide viewing angle to allow viewing from a sitting or standing position, or moving from side-to-
●
side
Adjustable tilt, height, swivel, and pivot capabilities
●
Removable stand for flexible monitor panel mounting solutions
●
HP Quick Release 2 to quickly install the monitor on the stand with a simple click and remove it
●
with the convenient sliding tab release
Optional thin client mounting bracket that attaches to the rear of the stand (purchased
●
separately)
40mm x 40mm VESA standard mounting holes on rear panel for mounting an external device
●
Easy access pull-out information card with the information needed when contacting HP support
●
HP Z27x Monitor 1