Table of Contents
Advertisement
DCI Container Size
4096 × 2160
4096 × 2160
2048 × 1080
2048 × 1080
Finally, special display modes for 4K input resolutions are also provided to facilitate the display of 4K
content on the Z27x.
Using the Digital Cinema Display Options
All of the digital cinema display options are located in the OSD on the Main Menu > Image
Adjustment > Aspect Ratio Display page. These options are unavailable and the menu option
dimmed unless one of the following resolutions is being displayed via the active video input:
2048 × 1080
●
4096 × 2160
●
3840 × 2160
●
NOTE:
Though the Digital Cinema Options menu is available for the 3840 × 2160 resolution, the
aspect ratio options are not available because 3840 × 2160 is not a DCI container size.
To access the digital cinema display options:
1.
Connect a computer or video device to the monitor that is configured to output a 2048 × 1080 or
4096 × 2160 resolution.
2.
Press any button on the front bezel.
3.
Press the bottom Open Menu button to open the OSD.
4.
Select Image Adjustment to display the adjustment options screen.
5.
Select Aspect Ratio Display to display the display options.
6.
Select Digital Cinema Options to display the digital cinema options.
The following DCI Aspect Ratio options are available in the Image Region section of the Digital
Cinema Options page.
Show Entire DCI Container
This is the default option and will show the entire DCI 2048 × 1080 or 4096 × 2160 frame.
Crop to DCI 1.85:1 Aspect Ratio
This option crops 25 pixels from the left and right edges of the frame (for 2048-wide sources, 50
pixels from the left and right edges for 4096-wide sources). The resultant image is then displayed as
specified using the Aspect Ratio Display options described in the previous section.
36
Chapter 4 Operating the Monitor
Aspect Ratio
1.85:1
2.39:1
1.85:1
2.39:1
Horizontal Active Pixels
3996
4096
1998
2048
Vertical Active Pixels
2160
1716
1080
858
Hide quick links:
Advertisement
Table of Contents
