2 x 4 construction. Placement in unfinished construction If you are planning installation in unfinished construction, purchase the Bose rough in kit. See “Accessories” on page 7. Power drill Safety goggles...
Installing the Speakers Cutting the speaker hole Connecting the speaker wire Trace the template in the speaker location. Pull out at least 14 in. (36 cm) of the speaker wire. Allow enough wire to connect the speaker from where you are standing.
Virtually Invisible® 691 speaker Painting the grille Virtually Invisible® 691 speaker You can paint the speaker grilles before you attach them to the speaker. Bose is not responsible for the quality of adhesion or ® CAUTION: Certain forms of insulation (such as horse finish of non-factory-applied paints.
What to do • Visit owners.Bose.com No sound • Ensure the speaker wires did not from • Contact Bose customer service. Refer to the contact sheet disconnect from the speakers or the receiver/ speakers amplifier. in the carton. • Check the settings on your receiver/amplifier.