Table of Contents
Advertisement
Responding to Evacuation Indicator
When Incident Commander triggers Evacuation signal from his
command terminal, the RF Modem updates everyone in the
Fireground Communication System with the order to evacuate
the incident site.
Procedure:
1
Your radio sounds the Evacuation Tone at the profile's
maximum alert tone volume level. The display shows
EVACUATE.
2
Moving the volume knob to adjust the volume of the
Evacuation Tone from full volume.
OR
Perform any action on the radio other than volume
adjustments to cancel the evacuation indications and update
the command terminal.
OR
If preprogrammed with Manual Acknowledgement of
Evacuation Command, press the PTT button shall cancel
the indications and acknowledge the command terminal.
Tactical Public Safety(TPS) (Conventional
Only)
Using TPS Normal Transmission
TPS enabled the users of a group to identify a transmission
starts and ends clearly by displaying the caller's name or ID on
the radio display.
Procedure:
1
At TPS Zone Channel
Press PTT button to transmit.Talk clearly into the
microphone. Release PTT button to listen.
OR
Receive and listen to call, the radio displays the caller's
name or ID.
61
English
Advertisement
Table of Contents
