Table of Contents
Advertisement
Mode
Quick-Key
Override
IMPRES™ Battery Annunciator
This feature displays the current capacity and charges cycles of
your battery when a IMPRES Battery is powering your radio.
This feature must be enabled in your radio to see the
information.
The information shown are:
•
Rated Capacity
–
•
Remaining Capacity
mAh.
•
Estimated Charges
has gone through.
Accessing the Battery Info screen
Procedure:
1
<
>
or
to Batt.
108
English
Description
This feature can work in conjunction
with either of the two above variations.
You can override the transmit-inhibit
state by quick-keying the radio. In other
words, two PTT button presses within
the preprogrammed time limit.
Percentage of current battery capacity.
–
Remaining power of the battery in
–
Number of charges cycles the battery
2
Press the Menu Select button directly below Batt. The
display shows the details of the battery.
3
U
D
or
to scroll through the various information.
OR
Press the Menu Select button directly below Exit to return
to the previous screen.
OR
H
Press
to return to the Home screen.
Accessing the General Radio Information
Your radio contains information on the following:
•
Radio Information
•
IP Display
•
Control Assignments
•
Soft ID (If Enabled)
Note:
The radio automatically exits the feature, if the feature
inactivity timer is enabled, when the radio is left idle
and the timer expires. You will hear the Menu Inactive
Exit Tone upon feature exit.
Advertisement
Table of Contents
