Download  Print this page

Call Waiting; Block Caller Id; Conference Calling - Samsung Galaxy S4 mini User Manual

Hide thumbs

Advertisement

Block Caller ID

You can block your Caller ID (visible to other when you make a call), before making a call. The blocking
only lasts for that call; it then returns to regular Caller ID.
1. Press
2. Touch
3. To permanently block your number, contact your wireless service provider.
4. Touch
.
Note: To permanently block your number, contact your wireless service provider.

Call Waiting

When you're on a call, Call Waiting alerts you to incoming calls by sounding a tone. Your phone's screen
informs you that another call is coming in and displays the caller's phone number (if it is available).
Respond to an Incoming Call While You're on a Call
1. Touch and drag
2. To switch back to the first caller, touch Swap.
Note: For those calls where you don't want to be interrupted, you can temporarily disable Call Waiting by
pressing
you end the call.

Conference Calling

With conference calling (also known as 3-way calling), you can talk to two people at the same time. When
using this feature, the normal airtime rates will be charged for each of the two calls.
1. Press
2. Enter a phone number and touch
3. Once you have established the call, touch Add call and dial the second number. (This puts the
first caller on hold and dials the second number.)
4. When you're connected to the second party, touch Merge. Your conference call is now in
session.
5. To end the conference call, touch
you and the remaining caller stay connected. If you initiated the call and are the first to hang up,
all callers are disconnected.)
Phone Calls
and touch
Phone > Keypad tab.
.
to the right. (This puts the first caller on hold and answers the second call.)
before placing your call. Call Waiting is automatically reactivated once
and touch
Phone > Keypad tab.
. (If one of the people you called hangs up during your call,
.
48

Advertisement

Table of Contents

   Also See for Samsung Galaxy S4 mini

Comments to this Manuals

Symbols: 0
Latest comments: