Ask Proxima C170 User Manual page 10

Ask user's guide projector c170
Table of Contents

Advertisement

If you are using a desktop computer and want to see the image on your
computer screen as well as on the projection screen, plug the monitor cable
connect monitor cable
to the black Computer 2 connector on the projector. This connector can be
used as monitor out or VESA in. The default is VESA in, so you must
change this option in the menu to use monitor out. See page 34 to switch
between the two functions.
If you prefer connecting your projector to your computer with an optional
VESA cable, connect one end of the cable to the VESA port on your com-
connect VESA cable
puter, and connect the other end of the cable to the blue Computer 2 con-
nector on the projector.
This connector can be used as monitor out or VESA in. The default is VESA
in.
You can control the projector from an LCD control panel or computer by
connecting an RS-232 cable to the projector's Serial Control connector. Spe-
connect RS-232 cable
cific RS-232 commands can be found in the Service and Support section of
our website.
You can play JPEGs using the LitePort USB connector and LitePort player.
connect USB mass storage device
You need a USB mass storage device to use this connector. See page 27 for
details.
8

Advertisement

Table of Contents
loading

Table of Contents