Device Elements; Start Up; Operation - Kärcher CV 66/2 Manual

Device elements

1 Pushing handle, adjustable
2 Cable clamp
3 Cable holder, rotating
4 Storage compartment
5 Lock of pushing handle
6 Lid of filter chamber
7 Suction hose connection (for optional
suction set)
8 Fuse for brush drive
9 Fuse for suction turbine
10 Display 'Filter bag is full'
11 Power switch
A Appliance switch in OFF position
B Appliance switch in ON position
Colour coding
The operating elements for the cleaning
–
process are yellow.
The controls for the maintenance and
–
service are light gray.
10
Inserting a filter bag
 Open lid of filter chamber.
 Slide the filter bag into the basket with
the opening facing the connecting hub.
 Push the opening of the filter bag over
the connection nozzle.
 Close the lid of filter chamber.
Storing and removing the cable
 Wrap the mains cable of the appliance
around the three cable holders.
 Remove the entire mains cable by turn-
ing the rotating cable holder.
Adjust the pushing handle
 Swivel the pushing handle lock to the
outside, set the desired pushing handle
height and close the lock.
– 2
EN

Start up

Operation